Filter By:

Trainers/Rollers

Tacx Bushido Smart
$620.00
The Bushido is an interactive Smart trainer with wireless motor brake. It’s wireless motor brake, with a maximum resistance of 1400 Watts, ensures smooth pedaling, even during steep climbs. The Bushido powers itself and is therefore completely wireless, it doesn’t even need a power cable. Instead of training with a handlebar computer you can connect the trainer to the Tacx apps quickly and easily. Just like the other Smart trainers, the Bushido uses ANT+ and Bluetooth® Smart to communicate with the connected device for convenient training sessions. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the Bushido Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Since the Bushido is not hooked up to the power net, you can use this trainer anytime and anywhere. Even when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Automatic Resistance unit Wireless motor Realistic slope 15% 1 Descent simulation - Max brake power (10 sec.) 1400 Watt Sprint power (1 min.) 750 Watt Mass inertia 60 kg 2 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Tacx NEO 2 Smart
Meet The NEO 2 Smart, the pinnacle of indoor bike training. In addition to immersive features that truly make you feel like you’re riding outdoors, this new direct drive also features pedal stroke analysis and a number of other refinements that make it one of the most quiet, realistic and accurate bike trainers available. - Next-to-silent smart bike trainer with improved accuracy within 1%; measures power and cadence - Enables accurate pedal stroke analysis with left and right balance and power distribution - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride feel - Unique motor design allows for a maximum sprint resistance of 2,200 watts and simulates climbs up to a 25% incline - Only bike trainer with road feel, a feature that lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Mains power optional Power indicator: Multicolor LED , Spot on floor Connection indicator: (ANT/BT) 2 LEDs Firmware upgradable: Yes Suitable cassettes: >2018: Shimano & SRAM: 8 - 11 speed; <2018: Various Shimano, SRAM & Campagnolo cassettes. >2018 Campagnolo body sold separately. Suitable axles: Road 130mm, MTB 135mm. Adapters for other widths available Supplied with: Front wheel support, Quick release for road bikes and QR-fork mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) Height: 550 mm (21.7 in) Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2800 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
Tacx Neo Smart
$1,370.00
The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Kinetic 12mm Traxle Through-Axle
$49.00
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Giant Chopping Block
$13.00
Giant's Chopping Block lifts your front wheel so it's even with your rear wheel while on a trainer. It's compatible with 26-inch and 700c wheels and has a stable, anti-skid base.
Giant Cyclotron Auto Trainer
$260.00
- Progressive magnetic resistance automatically gives a wide range of resistance from easy spins to burning climbs with no remote adjuster - Non–skid rubber adjustable leveling feet - Precision–turned 2" aluminum roller and 1500g (3.3lbs) flywheel are mounted to a stiff, die–cast aluminum carrier for smooth pedaling action - Tough steel replacement quick-release skewer included - Accommodates most wheel/tire sizes 29", 27", 700C, and 26"
Giant Cyclotron Fluid Trainer
- Real Road Simulation (RRS) technology provides up to 2000 watts of quiet, smooth, progressive resistance - TurboTron 70mm alloy roller with internal cooling fins reduces heat build up and prolongs tire life - F4 fluid formed alloy frame provides incredible stiffness - Dial-adjust anti-skid feet keep your trainer stable and your floors clean - Accommodates most wheel from 24" to 29" - 7.5lb flywheel for improved road feel
Giant G-Thang
Giant's G-Thang keeps corrosive sweat from harming your bike during an indoor training workout. It's made from soft, absorbent, washable terry cloth and is attached to your handlebars and top tube via elastic and Velcro straps.
CycleOps Classic Series Trainer Thru Axle Adapter
Cycleops' Thru Axle Adapter kit for the Classic Series trainers consists of an axle, washers, end caps with bolts, and a shorter version of their bolt-action slider. The axle is threaded on both sides to fit Syntace- and Maxle/ABP-style thru-axle systems.
CycleOps Fluid2 Trainer
CycleOps' Fluid2 Trainer utilizes Power Band technology to allow for distinct resistance changes without reaching to a lever on the unit. The large flywheel with fluid resistance delivers a smooth, realistic road feel while sturdy legs provide a stable platform for pumping out hard, 600-watt efforts and out-of-the-saddle climbs. A favorite among serious racers, the Fluid2 is easily transportable and stands up to repeated punishment by the burliest of legs for years of impressive performance.
CycleOps Trainer Thru Axle Adapter
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Page 1 of 1