Other

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

Nylon cable ties - 8 inches long

Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.

This adaptor makes 135mm rear MTB axle compatible with any stationary fluid/wind trainer. - Stainless steel construction for durability. - Fits 135 x 12mm rear axle. - Compatible with 5mm Allen for easy installation.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Replacement SKS Rubber Straps for RacebladePro and S-Board

Rubber straps for Speedrocker, Mudrocker, and VeloFlexx. - Replacement only - Fenders include straps

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection

K-Edge Cross Single adds additional protection to a single ring set-up by preventing the chain from jumping up or off the ring. - Eliminate chain-drop due to rough terrain - For use with single chainring cranksets - Clamps and adjusts independent of front derailleur - Chain catcher pad is shaped to allow for 'bottom' chain derailment without chain drop when back pedaling is necessary for foot adjustment and will re-align the chain when forward pedaling is resumed - Use with a chainring guard for maximum chain control - Compatible with framesets that allow for a 'low' mounting position (minimum of 53.2 mm from the bottom of the cross clamp to the center axis of the crank spindle is required for a 32T chainring)

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Sold individually

INVISIBLE INFLATION Lightweight, firmly attached and quiet, but easily accessible when you need it, the Giant Clutch Fork Storage kit fits a CO2 cartridge and inflator right into your fork’s steerer tube and helps you ride pack-free. FEATURES: - Invisible until you need it - Multiple taper mounting design - Rubber mallet installation, no need for any glue or adhesive - Carries a 16g or 25g CO2 cartridge and inflator (cartridges sold separately) SPECIFICATIONS: - Tools: 16g or 25g CO2 Cartridge, CO2 inflator Sizes: 160 x 40 x 21mm - System: Compatible with RockShox & Fox & DVO Forks - Weight: 118g (with a 25g CO2 cartridge) - Material: Aluminum

Giant's Mobility Kickstand attaches to your bike's frame at the rear dropout for convenience and easy access.

Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included

- Allows two SuperStands to be connected together in an unlimited number of configurations to suit every bicycle shop layout, size and area

Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range