Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cranksets

Wheels Manufacturing Inc. BB Cup Spacers for Specialized Carbon Frame
$24.95
The Wheels Manufacturing 3.5mm Spacer Kit for 61mm Specialized OS Carbon Frame widens 61mm wide Specialized Carbon OSBB frame BB shells for use with Pressfit 30 bottom brackets. Place one 3.5mm BB cup spacer between each bottom bracket cup and the frame when installing the bottom bracket. Additional crank spindle spacers are included to fine-tune any crankset fitment play, and these spacers are machined from engineering-grade Delrin. Includes: - (2) - 3.5mm bottom bracket cup spacers (46mm ID) - (4) - .5mm crank spindle spacers (24mm ID) - (2) - 1.0mm crank spindle spacers (24mm ID)
Wheels Manufacturing Inc. Freewheel/BB Spacer
$19.95
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Sunlite Alloy Singlespeed Double Guard Crankset
$60.00
•Single speed crankset •Forged alloy crank arms •Square taper interface •Does not include BB •44-tooth chainring •Double chainring guard
Sunlite Alloy Triple Crankset
$90.00
• 6/7/8-speed MTB crankset • Square taper interface • Alloy arms • Replaceable steel chainrings • Does not include BB • Bolt Pattern: 104/64 x 4-bolt
Sunlite Aluminum Crankarm (Left)
$13.99 - $20.00
• Square taper interface • Only includes left crank
Sunlite Aluminum Low Profile Crankarm (Left)
$20.00
• Square taper interface • Only includes left crank • 175mm length
Sunlite Cottered Pin
$2.00
- Sunlite Cottered Pins
Sunlite Mini Hex Crankset
• Compatible with mini hex chainrings
Sunlite One-Piece Crankarm
$13.99 - $20.00
- Forged steel - 24 TPI
Sunlite Steel Cottered Crankarm
$10.00
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins
Sunlite Steel Crankarm
$20.00
• One-piece • 170mm • 24 TPI
Sunday Saker V2 Cranks
$80.00
The Saker Crank is an affordable, yet burly 3-piece crank with tubular chromoly arms featuring a single pinch-bolt design. It uses a hardcore, 19mm chromoly spindle with 8 splines for easy setup-and-forget-it strength. The crank includes a 19mm Mid BB with spacers and comes in both RHD- and LHD-compatible versions. - Material: Tubular chromoly 3-piece - Arm Length: 175mm, 165mm, and 155mm - Spindle Type: 8 spline - Spindle Size: 19mm - Drive: RHD and LHD
Specialized Power Cranks - Shimano Ultegra Upgrade Kit
$525.00
Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks Ultegra Upgrade Kit are no exception. With our lightweight power sensors on a Shimano Ultegra crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth® devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 8000 generation Ultegra left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.
Shimano Deore 10-speed Double Crankset
$149.95
Shimano's Deore Crankset features the efficiency and fast shifting to let you make the most out of the trails. Two-piece construction, outboard bottom bracket bearings, and hollow-forged crankarms transfer your power quickly and smoothly to the rear wheel. Shimano's computer-designed chainrings have the benchmark front shifting the company is known for.
Shimano Dura-Ace 9100 11-Speed Crankset
$624.99 - $700.00
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Shimano Tiagra Crankset
$150.00
You'll always find the perfect gear with Shimano's Tiagra Crankset. It's crafted from aluminum for low weight and efficient power transfer, while the integrated axle furthers both of those attributes. It shifts positively as well with ramped and pinned SG-X chainrings that boost shifting speed and precision. Options: - Standard Double (52/39) - Compact Double (50/34) - Triple (50/39/30)
Shimano Ultegra Crankset
$246.99
Low weight, efficiency, and speed: That's what Shimano's Ultegra Crankset brings to every ride. The proprietary four-arm design sheds grams and increases stiffness for more power straight to the road. Computer-designed chainrings with optimally placed ramps and pins are a revolution in front shifting with fast, smooth gear changes that set the standard. A wide range of gearing options and crank lengths offers you the opportunity to find the crank that suits your riding style.
SRAM Apex 1 Crankset
$108.00
- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth
SRAM NX Eagle DUB Crankset
$105.00
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 49.0mm chainline
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$7.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Odyssey Calibur Cranks
The Calibur Cranks are Odyssey's “traditional” 3-piece, 4130 chromoly cranks. With all the hardware and sealed bottom bracket included. Features: - LHD/RHD Compatible - Post-Weld Heat-Treated 4130 Chromoly Arms - Hollow 22mm, 48 Spline, Chromoly Spindle - 6mm Spindle Bolts - Sealed Bottom Bracket Included - Rustproof Black or Chrome - Available in 165mm, 170mm & 175mm size options
Black Ops One Piece Crankset
$40.00
- One-piece chromoly crankset - 24TPI - Length: 175mm - Weight: 997g
Race Face Atlas AM Crank Bolt/Puller
Race Face steel crank bolt/puller for Atlas AM cranks.
FSA 30mm Crank Bolt with M30 Cap
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
Page 1 of 1